Pure Storage FA Series (SSH)

Description

This connector monitors environmental sensors, physical disks, management network cards and fiber ports for Pure Storage FA Series arrays. It relies on the SSH protocol.

hardware pure storage

Enterprise Connector

This connector requires the Enterprise edition of MetricsHub.

Superseded Connector

This connector is superseded by:

• PureStorageREST
• PureStorageRESTToken
• PureStorageRESTv2

Target

Typical platform: Pure Storage

Operating system: Storage System

This connector is not available for the local host (it is applicable to remote hosts only).

Prerequisites

Leverages: Pure Storage Management Card

Technology and protocols: Commands

Examples

CLI

metricshub HOSTNAME -t storage -c +PureStorage --ssh -u USER

metricshub.yaml

resourceGroups:
  <RESOURCE_GROUP>:
    resources:
      <HOSTNAME-ID>:
        attributes:
          host.name: <HOSTNAME> # Change with actual host name
          host.type: storage
        connectors: [ +PureStorage ] # Optional, to load only this connector
        protocols:
          ssh:
            username: <USERNAME> # Change with actual credentials
            password: <PASSWORD> # Encrypted using metricshub-encrypt

Connector Activation Criteria

The Pure Storage FA Series (SSH) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• The command below succeeds on the monitored host:
  • Command: puredrive list
  • Output contains: BAY (regex)

Metrics

Type	Collected Metrics	Specific Attributes
enclosure	hw.status{hw.type="enclosure", state="degraded|failed|ok"} hw.status{hw.type="enclosure", state="present"}	id model name vendor
fan	hw.status{hw.type="fan", state="degraded|failed|ok"} hw.status{hw.type="fan", state="present"}	hw.parent.id hw.parent.type id name
network	hw.network.bandwidth.limit hw.network.up hw.status{hw.type="network", state="degraded|failed|ok"} hw.status{hw.type="network", state="present"}	hw.parent.id hw.parent.type id name
other_device	hw.status{hw.type="other_device", state="degraded|failed|ok"} hw.status{hw.type="other_device", state="present"}	device_type hw.parent.id hw.parent.type id name
physical_disk	hw.physical_disk.size hw.status{hw.type="physical_disk", state="degraded|failed|ok"} hw.status{hw.type="physical_disk", state="present"}	hw.parent.id hw.parent.type id name
power_supply	hw.status{hw.type="power_supply", state="degraded|failed|ok"} hw.status{hw.type="power_supply", state="present"}	hw.parent.id hw.parent.type id name
temperature	hw.status{hw.type="temperature", state="degraded|failed|ok"} hw.status{hw.type="temperature", state="present"} hw.temperature	hw.parent.id hw.parent.type id name