HP-UX - sasmgr Disk Controllers

Description

This connector provides hardware SAS RAID disks status information on HP-UX systems. Requires root privileges.

hardware hp-ux hpe raid

Enterprise Connector

This connector requires the Enterprise edition of MetricsHub.

Superseded Connector

This connector is superseded by:

• HPUXWBEM

Target

Typical platforms: HPE Alletra 9000, HPE Integrity, HPE SuperDome, HP-UX

Operating system: HP-UX

Prerequisites

Leverages: HP-UX system commands (sasmgr, ioscan etc.)

Technology and protocols: Commands

This connector requires advanced privileges on the managed host for the command below:

• /opt/sas/bin/sasmgr

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the command listed above.

Sample of /etc/sudoers to allow the above command to be run as root by the metricshub account:

metricshub ALL=(root) NOPASSWD: /opt/sas/bin/sasmgr

Examples

CLI

metricshub HOSTNAME -t linux -c +HPUXSasMgr --ssh -u USER --sudo-command-list /opt/sas/bin/sasmgr

metricshub.yaml

resourceGroups:
  <RESOURCE_GROUP>:
    resources:
      <HOSTNAME-ID>:
        attributes:
          host.name: <HOSTNAME> # Change with actual host name
          host.type: linux
        connectors: [ +HPUXSasMgr ] # Optional, to load only this connector
        protocols:
          ssh:
            username: <USERNAME> # Change with actual credentials
            password: <PASSWORD> # Encrypted using metricshub-encrypt
            useSudo: true
            useSudoCommands: [ "/opt/sas/bin/sasmgr" ]

Connector Activation Criteria

The HP-UX - sasmgr Disk Controllers connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• The device type must be one of: HP
• The command below succeeds on the monitored host:
  • Command: /bin/ls /opt/sas/bin/sasmgr
  • Output contains: sasmgr$ (regex)
• The command below succeeds on the monitored host:
  • Command: /bin/sh ${file::embeddedFile-1}
  • Output contains: Info for PHY ID (regex)

Metrics

Type	Collected Metrics	Specific Attributes
disk_controller	hw.status{hw.type="disk_controller", state="degraded|failed|ok"} hw.status{hw.type="disk_controller", state="present"}	controller_number firmware_version hw.parent.type id model name vendor
logical_disk	hw.logical_disk.limit hw.status{hw.type="logical_disk", state="degraded|failed|ok"}	hw.parent.id hw.parent.type id name raid_level
physical_disk	hw.status{hw.type="physical_disk", state="degraded|failed|ok"} hw.status{hw.type="physical_disk", state="present"}	hw.parent.id hw.parent.type id name