Adaptec Storage Manager (DPT)

Description

This connector enables hardware monitoring for disk monitoring through the Adaptec Storage Manager SNMP sub-agent which supports all DPT-based Adaptec RAID controllers.

adaptec fujitsu hardware linux raid

Enterprise Connector

This connector requires the Enterprise edition of MetricsHub.

Target

Typical platforms: Adaptec, Fujitsu PRIMERGY

Operating systems: Microsoft Windows, Linux

Prerequisites

Leverages: Adaptec Storage Manager

Technology and protocols: SNMP

Examples

CLI

metricshub HOSTNAME -t win -c +DptStorageManager --snmp v2c --community public

metricshub.yaml

resourceGroups:
  <RESOURCE_GROUP>:
    resources:
      <HOSTNAME-ID>:
        attributes:
          host.name: <HOSTNAME> # Change with actual host name
          host.type: win
        connectors: [ +DptStorageManager ] # Optional, to load only this connector
        protocols:
          snmp:
            version: v2c # Read documentation for v1, v2c and v3
            community: public # or probably something more secure

Connector Activation Criteria

The Adaptec Storage Manager (DPT) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

• An SNMP GetNext on the OID 1.3.6.1.4.1.1597.1.2.1 must return a non-empty value

Metrics

Type	Collected Metrics	Specific Attributes
disk_controller	hw.status{hw.type="disk_controller", state="present"}	bios_version controller_number firmware_version hw.parent.type id model name vendor
logical_disk	hw.logical_disk.limit hw.status{hw.type="logical_disk", state="degraded|failed|ok"}	hw.parent.id hw.parent.type id name raid_level
physical_disk	hw.physical_disk.size hw.status{hw.type="physical_disk", state="degraded|failed|ok"} hw.status{hw.type="physical_disk", state="predicted_failure"} hw.status{hw.type="physical_disk", state="present"}	hw.parent.id hw.parent.type id name serial_number vendor